I’ll be adding a few of these here. I’ve really enjoyed the insider preview of 2022 so far. Chromium edge being the default is like a breath of fresh air needed by IT pros since forever. Enjoy! They are obviously…
Leave a CommentAnswers.
JackHarvest.com Posts
There’s some really nasty prerequisites for doing this. Maybe I’ll write some tutorials of my own for those later, but, for now, we have to assume the following:
- You have a bootloader installed (so that firmware files can be updated via USB).
- Stock Ender 3’s with v1.x boards do NOT have a bootloader from the factory. You’ll have to install one. Google is your friend.
- Assuming you’ve got a bootloader installed, you’re likely somewhat adept at how the firmware update process works.
Assuming those are completed, its really quite simple:
Leave a Comment
The video goes over the majority of what I wanted to convey. It isn’t scripted, so we have some fun when things don’t go well. Anyway, here’s some code blocks with helpful information in case checking the Youtube description is…
1 Comment
You’ve seen dozens of articles. A couple of Youtube videos. You tried them out a few years ago and it wasn’t worth the hassle or looked scary. I get it. But look, hear me out, watch this short-but-fun video helping…
Leave a Comment
I love my custom host server icon. I dabbled around, and did it incorrectly a few times (take backups!) before I got the recipe right. I mean look at this thing. Nobody’s server looks like this crusty old box. Its…
2 Comments
Recently went on a hunt to find out how I could change the icon represented within Vsphere for the “server” it finds. The original image is named “obj-host.png”, which, after a quick google, yielded zero results. Bummer. In a browser,…
Leave a CommentSo, got this error recently when attempting to upgrade from ESXI 6.7u1 to 6.7u2: [InstallationError] [Errno 28] No space left on device vibs = VMware_locker_tools-light_10.3.5.10430147-12986307 Please refer to the log file for more details. Yuck. [Note, the version of locker…
8 CommentsSummarized version: Purchase the following: Mellanox ConnectX-3 10Gbe SFP card from eBay (~$24-$29 at time of writing). Make sure the length is x4; x8 is too long. M.2 NGFF to PCI-E x4 Adapter (~$10 for 2pack; Get the white one;…
25 Comments
This has been the best upgrade I’ve done so far. As your Google searches have shown, several zillion people have sworn up and down that a Glass print bed makes all the difference, followed by a paragraph of text talking…
1 Comment