jackharvest
Windows Server 2022 Wallpaper
I’ll be adding a few of these here. I’ve really enjoyed the insider preview of 2022 so far. Chromium edge being the default is like… Read More »Windows Server 2022 Wallpaper
How to change the boot screen logo on your Ender 3 3D printer (and likely others) to the Stardew Valley Logo
There’s some really nasty prerequisites for doing this. Maybe I’ll write some tutorials of my own for those later, but, for now, we have to assume the following:
- You have a bootloader installed (so that firmware files can be updated via USB).
- Stock Ender 3’s with v1.x boards do NOT have a bootloader from the factory. You’ll have to install one. Google is your friend.
- Assuming you’ve got a bootloader installed, you’re likely somewhat adept at how the firmware update process works.
Assuming those are completed, its really quite simple:
Read More »How to change the boot screen logo on your Ender 3 3D printer (and likely others) to the Stardew Valley Logo
How to Customize The Vcenter/VCSA Login Screen on Vmware/Vcenter 7.0 – An introductory Tutorial
The video goes over the majority of what I wanted to convey. It isn’t scripted, so we have some fun when things don’t go well.… Read More »How to Customize The Vcenter/VCSA Login Screen on Vmware/Vcenter 7.0 – An introductory Tutorial
How to change your Intel NUC Boot Logo. For reals this time.
You’ve seen dozens of articles. A couple of Youtube videos. You tried them out a few years ago and it wasn’t worth the hassle or… Read More »How to change your Intel NUC Boot Logo. For reals this time.
How to change the host server icon in vsphere 7.0 (and 6.7u3)
I love my custom host server icon. I dabbled around, and did it incorrectly a few times (take backups!) before I got the recipe right.… Read More »How to change the host server icon in vsphere 7.0 (and 6.7u3)
How to change the computer/server avatar/icon/image on vsphere summary page
Recently went on a hunt to find out how I could change the icon represented within Vsphere for the “server” it finds. The original image… Read More »How to change the computer/server avatar/icon/image on vsphere summary page
No Space Left On Device vmware_locker_tools error when upgrading ESXI 6.7
So, got this error recently when attempting to upgrade from ESXI 6.7u1 to 6.7u2: [InstallationError] [Errno 28] No space left on device vibs = VMware_locker_tools-light_10.3.5.10430147-12986307… Read More »No Space Left On Device vmware_locker_tools error when upgrading ESXI 6.7
Getting 10GbE on a Skull Canyon NUC without Thunderbolt 3 (NGFF to PCIE x4 Riser)
Summarized version: Purchase the following: Mellanox ConnectX-3 10Gbe SFP card from eBay (~$24-$29 at time of writing). Make sure the length is x4; x8 is… Read More »Getting 10GbE on a Skull Canyon NUC without Thunderbolt 3 (NGFF to PCIE x4 Riser)
Glass Print Bed on the Ender 3, Using Thermal Pads for Heat Transfer
This has been the best upgrade I’ve done so far. As your Google searches have shown, several zillion people have sworn up and down that… Read More »Glass Print Bed on the Ender 3, Using Thermal Pads for Heat Transfer
- « Previous
- 1
- 2