Skip to content

Author: jackharvest

GENO. The 3D Printed NAS with 2x 2.5Gbe, 8x 3.5″ Drives, 3x 120mm Fans, and a MinisForum NAB6.

Introducing… Geno. As a bonus feature, this build comes with the following flaws (free of charge!): However, here are some awesome features that are more difficult to find in a conventional setup: Why make this? I don’t have a good…

2 Comments

How to change the boot screen logo on your Ender 3 3D printer (and likely others) to the Stardew Valley Logo

There’s some really nasty prerequisites for doing this. Maybe I’ll write some tutorials of my own for those later, but, for now, we have to assume the following:

  • You have a bootloader installed (so that firmware files can be updated via USB).
    • Stock Ender 3’s with v1.x boards do NOT have a bootloader from the factory. You’ll have to install one. Google is your friend.
  • Assuming you’ve got a bootloader installed, you’re likely somewhat adept at how the firmware update process works.

Assuming those are completed, its really quite simple:

Leave a Comment